HT-9711 |
|
| Dynamic Testing Machine |  |
| Data Acquisition System Block Diagram Control Utility |
|
| Specifications | |||||||||
| Model | HT 9711-10 |
HT 9711-25 |
HT 9711-50 |
HT 9711-100 |
HT 9711-200 |
HT 9711-300 |
HT 9711-500 |
||
• |
Power source | Electro-Hydraulic Servo Control System |
|||||||
• |
Force capacity | kg |
1000 |
2000 |
5000 |
10000 |
20000 |
30000 |
50000 |
kN |
10 |
20 |
50 |
100 |
200 |
300 |
500 |
||
• |
Max. Stroke (mm) | Dynamic |
±25 |
||||||
Static |
±50 |
||||||||
• |
Control mode | Force, displacement control |
|||||||
• |
Static force sensor capacity | x120%, x100%, x50%, 20%, 10% (auto gain selection) |
|||||||
• |
Static force sensing error | less than or equal to ±1% (Calibration error) |
|||||||
• |
Dynamic force sensor capacity | x100%, x50%, 20%, 10% |
|||||||
• |
Dynamic force sensing error | less than or equal to ±1% (Calibration error) |
|||||||
• |
style | E type |
E type |
E type |
E type |
D type |
D type |
D type |
|
• |
Operating width | 620 |
620 |
760 |
760 |
750 |
750 |
750 |
|
• |
Operating height | 250~1000 |
250~1100 |
||||||
• |
Dimensions (WxDxH) mm | 1270x600x2400 |
1325x750x2650 |
||||||
• |
Hydraulic power | QR-10 |
QR-20 |
QR-10 |
QR-20 |
QR-40 |
QR-60 |
QR-80 |
|
• |
Flow rate (L/min) | 10 |
10 |
10 |
20 |
40 |
60 |
80 |
|
• |
Servo valve rated flow rate (L/min) | 15 |
15 |
15 |
30 |
45 |
80 |
120 |
|
• |
Accumulator capacity (pressure/return end) (L) | 1L/1L (optional) |
5L/5L (optional) |
||||||
• |
Displacement sensor | LVDT built in actuator |
|||||||
• |
Waveform |  |
 |
 |
 |
||||
(Ramp) |
(Sine) |
(Triangular) |
(Square) |
||||||
dimension, table, stroke, and capacity can be made to order depending on customer requirements |
|||||||||
| Servo Hydraulic System Specifications | |
1. |
One servo-actuator |
2. |
500~50,000 kg force (used defined) |
3. |
One hydraulic power package |
• |
Main pump: 40~120 l/min, 200kg per cubic cm (can be set up to 310 kg per cubic cm) |
• |
Motor: 3phase, 220VAC, 40~80HP |
• |
Tank: 400 L capacity |
• |
Oil Filter: 5 micron |
• |
Accumulator: Pressure end 1 qt., return end 1 qt. (option) |
• |
Cooling system: 1set |
• |
Pressure switch: 1set |
• |
Crosshead adjustment power package, provides power to tune crosshead position and lock |
4. |
Servo valve: 40~180 L/min rated flow rate, bandwidth greater than or equal to 50Hz, resolution less than or equal to 0.5% |
5. |
Fatigue type load cell: 500~50,000 kg., 0.05%FS nonlinearity, calibration error is less than or equal to 1% |
6. |
DC type LVDT: Built in actuator, 50~300mm stroke, 0.05% nonlinearity |
| Controller and Control Interface Specifications | |
1. |
Control one servo-actuator |
2. |
Closed loop force and position learning control |
3. |
Loading and shaking the test article |
4. |
Servo amplifier |
5. |
DC transducer conditioner |
6. |
A/D channel; 16bit resolution, 1/2LSB nonlinearity |
7. |
D/A channel; 16bit resolution, 1/2LSB nonlinearity |
8. |
D/O channel; process control, crosshead position adjustment |
• |
Computer: 1set |
• |
CPU: Pentium MMx200 or greater |
• |
RAM: 32MB |
• |
15" super VGA monitor, 1024x768 |
• |
Hard Drive: 2.1GB or greater |
• |
Printer: Inkjet |
• |
1.44 floppy drive |
• |
Rack: 1set |
| Servo Hydraulic System Specifications | |
1. |
Operating system: Microsoft Windows 95 |
2. |
Set-up test sequence database management |
3. |
Fixture constant load and minor adjustment |
4. |
Auto-generation sine, triangular, ramp, and square wave |
5. |
Closed-loop learning controller, force and position control |
6. |
Real time data display |
7. |
Test data auto storage |
8. |
Three types of graph zoom |
9. |
Provides force-time, disp.-time, force-disp. diagram |
10. |
Present tabular and graphical reports |
11. |
Report editor |
12. |
Auto stop |
13. |
Control safety diagnostics |
14. |
Diagram auto scale and user defined |
