HT-2402, HT-2402BI, HT-2402BP |
|||||||||
| Computer Servo Control Material Testing Machine | |||||||||
|
|||||||||
| Specifications | |||||
| Model | HT-2402, HT-2402BP, HT-2402BI |
||||
• |
Capacity | kN |
250 |
100 |
50 |
• |
Measurement of test force |
Standard-accuracy type (Class 1) |
Accuracy of test force is better than ±1% within the range 1/1~1/250 of full scale of load cell, which conforms to most international standards such as ISO 7500/1 class 1, EN 10002-2 grade 1, BS 1610 class 1, DIN 51221 class 1, ASTM E4, JIS B7721 class 1, JIS B7723 class 1, JJG 475-88, GB/T 16491-1996 class 1 and CNS 9470/9471. | ||
High-accuracy type (Class 0.5) |
Accuracy of test force is better than ±0.5% within the range 1/1~1/250 of full scale of load cell, which conforms to most international standards such as ISO 7500/1 class 0.5, EN 10002-2 grade 0.5, BS 1610 class 0.5, DIN 51221 class 0.5, ASTM E4, JIS B7721 class 0.5, JIS B7723 class 0.5, JJG 139-1999, GB/T 16491-1996 class 0.5 and CNS 9470/9471. | ||||
Load cell |
H-8336 Low profile high precision tension/compression load cell as standard (maximum force x 1 set, with excellent expanding feature, available to connect several load cells at a time – optional) | ||||
Load amplification |
Type HT-2402 equipped with HUNG TA interface system, available with: ( A,B select one) (A) x1, x2, x5, x10, x20, x50, x100 seven gain(s) with auto range function, resolution 1/200,000; The factor 1/100,000 for single gain (B) x1, x2, x5, x10 four gains with auto range function, resolution 1/2000 function, resolution 1/20,000 |
||||
| Types HT-2402BP and HT-2402BI equipped with HT-2010 control indicator, available with x1, x2, x5, x10 four scales with auto range function, resolution 1/20000 | |||||
Selection of force units |
N, kN | ||||
• |
Test speed range (mm/min), with stepless setting |
Type HT-2402, 0.005~500 mm/min | |||
| Types HT-2402BP, HT-2402BI 0.05~500 mm/min | |||||
| Force applied should be no less than 25% of full scale of load cell if test speed is greater than 50mm/min (GB/T 16491-1996) | |||||
• |
Accuracy of speed control | ±1% (class 1) | ±1% (class 1) | ±1% (class 1) | |
• |
Accuracy of speed control | ±0.2% (class 0.5) | ±0.2% (class 0.5) | ±0.2% (class 0.5) | |
• |
Effective test depth | 575 mm | 575 mm | 575 mm | |
• |
Crosshead working table distance | Max. 1440 mm | Max. 1250 mm | Max. 1250 mm | |
• |
Test stroke (equipped with standard tensile grips) |
600 mm | 650 mm | 650 mm | |
• |
Over-travel & Overload protection function |
Stroke up & down position protection setting, when test force exceeds 10% of full scale, system auto stop to protection the system from overloaded. | |||
• |
Power | Servo motor |
AC servo motor & servo driver | ||
Consumption |
7.5 kVA | 3.5 kVA | 2.2 kVA | ||
Power supply |
3ø, 220VAC, 50/60 Hz (380V/415 V optional) | ||||
• |
Measuring system |
Hardware |
Refer to computer hardware specifications | ||
Controller |
HT-2402 connects HUNG TA Interface system; HT-2402BP/HT-2402BI connects HT-2010 Control indicator | ||||
Special software |
Refer to special control modes of computer measuring system (optional) | ||||
• |
Dimensions | Console (WxDxH) |
117x83x249 cm | 111x76x225 cm | 111x76x225 cm |
Control unit (WxDxH) |
HT-2402/HT-2402BP: 120x60x74 cm, HT-2402BI doesn’t have control unit | ||||
| • |
Weight | Console |
1500 kg | 1000 kg | 750 kg |
Control unit |
100 kg | 100 kg | 100 kg | ||
• |
Standard accessories | Tensile grips x 1set, tool kit x 1set, operation manual x 1set, certificate of calibration x 1set | |||
• |
Optional accessories |
Extensometer |
Refer to the specifications of HT-9160, HT-9161, HT-9860, HT-8160 (optional) | ||
Thermostat chamber |
Refer to the specifications of HT-8747 series (optional) | ||||
Grips |
Refer to the brochure of grips and fixtures, or provide specifications or actual samples for design and manufacture | ||||
